Gunner Posted September 6, 2017 Share Posted September 6, 2017 I have a Dixie Narco 501e vending machine, and it takes your money, reads vend when you hit button. Then gives you your change back. Inside code that is blinking refers to "Accept gate error" Any ideas what is going on. Just started happening. Was working fine. Link to comment Share on other sites More sharing options...
lacanteen Posted September 7, 2017 Share Posted September 7, 2017 The accept gate is in the coin changer. Try swapping it first. However, normally when it accepts money and tries to vend it's either a jammed column or the middle fuse on the board is blown. Link to comment Share on other sites More sharing options...
Chard Posted September 7, 2017 Share Posted September 7, 2017 Sounds like two different problems to me. The accept gate error sounds like you've got an mei 7512. Power off the door, pull the coin mech, take apart the flight deck for the coins and look for coins stock the the diverse gates. One sounds like a burnt fuse on the control board. You'll need to visibly check the fuses on the control board to see. Was there a power surge at this location? Link to comment Share on other sites More sharing options...
droopi Posted September 7, 2017 Share Posted September 7, 2017 7 hours ago, Chard said: One sounds like a burnt fuse on the control board. You'll need to visibly check the fuses on the control board to see. You should always use a multimeter to check the resistance (ohm), in many cases you can't see that the fuse is blown. If you don't have a multimeter you should just replace the fuses as they are a cheap swap. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.