Coal River Vending Posted January 19, 2018 Share Posted January 19, 2018 I see shims but which ones are they? Link to comment Share on other sites More sharing options...
QuikVend Posted January 19, 2018 Share Posted January 19, 2018 On the wide column, you'll see 4 shims on each side if it's set up for cans and only 2 on each side if it's bottles. On the narrow column, the shim will look about 1/2" thick for cans and about 1/4" for bottles. Your pictures are too small to tell how your machine is setup. Link to comment Share on other sites More sharing options...
Snoopy Posted January 20, 2018 Share Posted January 20, 2018 Those are bottle shims in the picture. Link to comment Share on other sites More sharing options...
AZVendor Posted January 20, 2018 Share Posted January 20, 2018 The bottle shims in the wide column are short in height from front to back. If yours are two heights, short front and tall back, then they are for cans. The narrow can shims have a 1/2" lip on the bottom edge and the bottle shims have a 1/4" lip. The shims themselves are those same thicknesses inside the columns. If you need any shims you can email me at rbepic4gatgmaildotcom. Link to comment Share on other sites More sharing options...
Coal River Vending Posted January 21, 2018 Author Share Posted January 21, 2018 That’s 20oz bottles correct? Link to comment Share on other sites More sharing options...
AZVendor Posted January 21, 2018 Share Posted January 21, 2018 16 and 20 oz though the metal can shims work best for 16 oz bottles no larger in diameter than a 12 oz can. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.