Zachsea Posted July 7, 2018 Share Posted July 7, 2018 Having trouble with 2 greenlite card readers and seed cashless devices making the display on the readers say "please use cash". Machines are ap lcm3 mdb and national 168. Both machines wont light up the mdb light on the seed cashless device but everything else is green. Both bill acceptors are getting power and will take bills but both coin acceptors have no coins in the tubes. Any input is greatly appreciated! Link to comment Share on other sites More sharing options...
AZVendor Posted July 7, 2018 Share Posted July 7, 2018 Probably too weak of a signal at your location. Did they ever work there before? Link to comment Share on other sites More sharing options...
Zachsea Posted July 7, 2018 Author Share Posted July 7, 2018 They have not. Checked the signal again and its at 9 and the signal light is yellow Link to comment Share on other sites More sharing options...
Zachsea Posted July 7, 2018 Author Share Posted July 7, 2018 Would lack of reception not make the mdb light come on cause it doesnt think its has enough reception to go through with the purchase? Link to comment Share on other sites More sharing options...
Zachsea Posted July 7, 2018 Author Share Posted July 7, 2018 Now this is the current lighting and it says "sig str 0 sig failure" Link to comment Share on other sites More sharing options...
Anacapa Vending Posted July 8, 2018 Share Posted July 8, 2018 On the national 168 did you go through the menu and set it to mdb card? LCM could be a EPROM/microprocessor. Not sure I know we have a LCM2 that is mdb but the cc reader won't work with board. Ended up upgrading to UCB board. Good luck. Link to comment Share on other sites More sharing options...
Zachsea Posted July 8, 2018 Author Share Posted July 8, 2018 Yes i did set the national to mdb card and also added the new microprocesser to the ap. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.