oldblue Posted December 26, 2012 Share Posted December 26, 2012 HI folks, I have a coinco ct 48 soda machine, had it for 20 years and it works great .Lately two of the doors are hard to open, you have to give them a good pull.Any insight on how to fix the doors before I take it apart ? Link to comment Share on other sites More sharing options...
Walta Posted December 26, 2012 Share Posted December 26, 2012 1 Remove all the cans. 2 Remove the vend mech . 3 Wash the plastic parts with warm water, keep the vend coil dry. 4 Inspect for broken plastic parts 5 reinstall and test. Walta Link to comment Share on other sites More sharing options...
snoopy12 Posted January 6, 2013 Share Posted January 6, 2013 I'm having a similar problem with my CT48. When looking at the machine, the door on the right side was broken so I replaced it with a new one. Now when coins are deposited, only the middle door opens; the other two won't work. Any ideas if there are levers that may have gotten moved during the process? Link to comment Share on other sites More sharing options...
mission vending Posted January 6, 2013 Share Posted January 6, 2013 I'm just amazed that there are some of these still in service. There were never that many made and have been out of production for 20 years or so. Good luck with the repairs. Link to comment Share on other sites More sharing options...
moondog Posted January 7, 2013 Share Posted January 7, 2013 I found this ad on the local CL in So Cal http://inlandempire.craigslist.org/bfs/3487566901.html The ad says CT49 but I suspect the parts are interchangeable Link to comment Share on other sites More sharing options...
Vendergy Posted May 11, 2013 Share Posted May 11, 2013 I can't seem to set the prices passed $2.25 Have rockers 2/5/6 on Should be $2.50 no? Link to comment Share on other sites More sharing options...
AZVendor Posted May 11, 2013 Share Posted May 11, 2013 Switch 2/5/6 on equals $1.30. Remember that the first switch on the left is .05 and each switch to the right doubles in value. If turning on a particular switch doesn't seem to work, just work the switch on and off a few times to clean the contacts. Link to comment Share on other sites More sharing options...
Vendergy Posted May 11, 2013 Share Posted May 11, 2013 Not according to the coinco manual...2=.10. 5=.80 6=$1.60. That all adds up to $2.50 if my math is correct! Tell me what rocker on's should I do to make it a $2.50 vend Link to comment Share on other sites More sharing options...
AZVendor Posted May 11, 2013 Share Posted May 11, 2013 You're right, my math was wrong. The manual is correct in the switch values, but if a value isn't added into the price correctly, just work that switch back and forth until it cleans up and registers correctly. Link to comment Share on other sites More sharing options...
Vendergy Posted May 11, 2013 Share Posted May 11, 2013 Yes will do some r&d and trial and error! Thanks bud! Link to comment Share on other sites More sharing options...
Vendergy Posted May 14, 2013 Share Posted May 14, 2013 Man! I've tried a thousand combinations...can't get passed $1.75... Vends at all crazy prices. Link to comment Share on other sites More sharing options...
AZVendor Posted May 14, 2013 Share Posted May 14, 2013 Forward me the manual and I'll look at it to determine what might be wrong. cvrepair@q.com Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.