AngryChris Posted April 28, 2014 Share Posted April 28, 2014 I have a DN 360 with no validator. I pulled a USA-15 validator out of another machine that I had upgraded. When I checked the Dn 360, I noticed that the coin mech did not have a plug for a validator harness. When I checked the model number, it was a 6200. So the question is, is a 6800H a direct replacement for a 6200? Do I need to change a relay or anything? Link to comment Share on other sites More sharing options...
CajunCandy Posted April 28, 2014 Share Posted April 28, 2014 Yes AngryChris If the connection from the USA DBA has twelve pins. Yes the TRC 6800H will work with it. I grabbed mine off the parts self and it plugged into a 6800H. Link to comment Share on other sites More sharing options...
AZVendor Posted April 28, 2014 Share Posted April 28, 2014 Yes the 6800 is a direct replacement for the 6200 and you can use the harness from the USA validator, if it's long enough (they made a short and long harness), it will plug right in to the 6800H 12 pin connection. Link to comment Share on other sites More sharing options...
AngryChris Posted April 28, 2014 Author Share Posted April 28, 2014 Thank you both. That's excellent to know! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.