matthew0582 Posted September 3, 2016 Share Posted September 3, 2016 i have a writtern combo, its a 3548 all in one. how does the refridgeration deck pull out? Link to comment Share on other sites More sharing options...
AZVendor Posted September 3, 2016 Share Posted September 3, 2016 That's a good question since USI doesn't even publish a parts manual for it. More than likely it pulls out the front like all of their later machines. I would first look at the back to see if there is any way it comes out the back and if not it then comes out the front. You probably pull the front panel off below the can module and maybe remove the vent screen. Then look for any brackets that hold the unit in as well as for any wiring harnesses you have to disconnect or remove before pulling the unit out. That is the problem with these machines that USI builds for someone else to sell - there's no real support for them other than calling USI for help and hoping that they can help you. Link to comment Share on other sites More sharing options...
rmorris1953 Posted September 3, 2016 Share Posted September 3, 2016 Show a picture of the front and back Link to comment Share on other sites More sharing options...
venddoctor Posted September 4, 2016 Share Posted September 4, 2016 The refer unit comes out the back of the 3548. Link to comment Share on other sites More sharing options...
kiwi Posted September 9, 2016 Share Posted September 9, 2016 On 9/4/2016 at 7:29 AM, matthew0582 said: i have a writtern combo, its a 3548 all in one. how does the refridgeration deck pull out? Not sure if you have already removed your deck or not but here is a "link" to a short video that may help if you haven't yet.... https://www.youtube.com/watch?v=UCIxIueBGLU Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.