tc vending Posted April 8, 2017 Posted April 8, 2017 Bought an AMS sensit 2 upgraded it to a sensit 3 board. When I had the board in the keypad, display didn't work and the the board beeps a lot with a red light. I assumed the sensit 3 board was bad. I dont have but one other AMS so I dont know a lot about them.
AZVendor Posted April 8, 2017 Posted April 8, 2017 AMS only makes the S4 kit now so where did you get the S3 board from? If you only changed the board out then you are missing whatever parts go with it like a compatible eprom.
tc vending Posted April 8, 2017 Author Posted April 8, 2017 I ordered a repaired sensit 3 board. AMS said that if I change from a sensit 2 board to a sensit 3 board that was all I need.
Technivend Posted April 8, 2017 Posted April 8, 2017 Unplug everything off the board except the power and then power it back up. See if it still happens if it does, start with the board if not it sounds like you have a connection misaligned.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.