Magiccity726 Posted August 6, 2017 Posted August 6, 2017 I have a machine on location and I didn't take the plastic film off the backlit. The machine is outside and now the film is starting to crack so I have to remove the film. Is there a solvent or some kind of spray that I can use to remove film? I tried wd40 and a putty knife but I'm scratching the backlit.
lacanteen Posted August 6, 2017 Posted August 6, 2017 The putty knife is causing the scratches. We use denatured alcohol, a soft cloth, and a lot of patience.
AZVendor Posted August 7, 2017 Posted August 7, 2017 If it's baked on you will need to replace the sign. The glue won't come off.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.