EastWest Posted August 15, 2017 Share Posted August 15, 2017 I have a couple of Dixie Narco machines that take forever to give credits for bills and then take forever to vend the selection and then take forever to give change... is there a way to fix this issue? Link to comment Share on other sites More sharing options...
AZVendor Posted August 15, 2017 Share Posted August 15, 2017 More information is needed. Model of the machine, which logic board, if any, is installed in it, models of coin mech and bill validator. This kind of sounds like you might have a conversion kit in it like one that changes the machine to MDB. Some of those can cause the vend sequence to move very slowly. Otherwise you might have a bad coin mech if it's a single price machine, or low power to the machine. You say this is happening on two machines so are they at the same location? If so then look at the power. If they are at different places then look at the possible issues mentioned first. You might also just be thinking things should move quicker but they don't move quick enough for you and they are normal for the machine. Link to comment Share on other sites More sharing options...
AngryChris Posted August 15, 2017 Share Posted August 15, 2017 Yes... "forever" could mean anything, so give us an actual time. 5 seconds? 15 seconds? Over a minute? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.