Snack Man 2000 Posted January 25, 2018 Share Posted January 25, 2018 The machine will not accept bill at all, and the coin mech works fine. I suspect the Lutech mm module has gone bad. Don't see any for sale at all, and Vendor's exchange says It would have to be fitted with a mdb board kit. They also said the power supply would have to be sent in and updated for the new board. I can't see spending a lot on this machine. Thinking about parting it out. Link to comment Share on other sites More sharing options...
AngryChris Posted January 25, 2018 Share Posted January 25, 2018 Replace that machine. Link to comment Share on other sites More sharing options...
Snack Man 2000 Posted January 25, 2018 Author Share Posted January 25, 2018 Just now, AngryChris said: Replace that machine. It was a trade in, I wouldn't use it on a route. Link to comment Share on other sites More sharing options...
AngryChris Posted January 25, 2018 Share Posted January 25, 2018 Oh. I scrapped a 4900 and two 5900's. The 5900's were in good shape but i am now rowe-free. Only thing i took out were validators and coin mechs. Link to comment Share on other sites More sharing options...
Snack Man 2000 Posted January 25, 2018 Author Share Posted January 25, 2018 Just now, AngryChris said: Oh. I scrapped a 4900 and two 5900's. The 5900's were in good shape but i am now rowe-free. Only thing i took out were validators and coin mechs. It looks like the boards are worth around $100 and the motors are cheap. I scrapped a full size drink machine today and got $26. This machine is heavy, so should get more than that. Link to comment Share on other sites More sharing options...
AZVendor Posted January 25, 2018 Share Posted January 25, 2018 It's all by weight and scrap prices are low since China stopped buying as much once their building boom ended 2-3 years ago. You're lucky to find $85 per ton now. I remember when it was as high as $200 per ton. I have scrapped DN440s for as little as $15 since. Link to comment Share on other sites More sharing options...
Amigo Posted January 31, 2018 Share Posted January 31, 2018 get a greenwick board from DS Vending. Still using 4900 and 5900 machines. They work fine. Link to comment Share on other sites More sharing options...
Snack Man 2000 Posted January 31, 2018 Author Share Posted January 31, 2018 42 minutes ago, Amigo said: get a greenwick board from DS Vending. Still using 4900 and 5900 machines. They work fine. I usually get them direct from John to save money, but they are $275 now. Think I will scrap the machine instead of spending that much on an old machine. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.