maestro489 Posted April 19, 2018 Share Posted April 19, 2018 I have a Rowe 5900 jr that currently has a 9340L coinmech that needs to be replaced. What other coinmechs can I use in this machine? Link to comment Share on other sites More sharing options...
lacanteen Posted April 19, 2018 Share Posted April 19, 2018 TRC-6000, 9300L. The 9340L has an additional input harness for bill acceptor kits made in the early 1990s. If you are not using that harness any 12 pin 110VAC L+ mech will work Link to comment Share on other sites More sharing options...
AZVendor Posted April 19, 2018 Share Posted April 19, 2018 If it is connected to a Coinco validator with a dedicated harness then you have to keep that model of coin mech. If you aren't using the validator harness off the mech then you can use any 110v logic mech or any 15 pin 24v mech. Link to comment Share on other sites More sharing options...
maestro489 Posted April 19, 2018 Author Share Posted April 19, 2018 I am using the validator harness of the coinmech. So I guess I'm stuck with the 9340L?? Link to comment Share on other sites More sharing options...
maestro489 Posted April 19, 2018 Author Share Posted April 19, 2018 Just found a 9300L with the validator harness. Is that the same thing as a 9340L? Link to comment Share on other sites More sharing options...
AZVendor Posted April 19, 2018 Share Posted April 19, 2018 Yes. The 9340L is just a 9300L with the Coinco validator harness plugged into the specialized board. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.