maestro489 Posted July 13, 2018 Share Posted July 13, 2018 I’ve got a national 147. It currently has 4 chip/pastry shelves and 2 cracker/candy shelves. Can I replace one of the cracker/candy shelves with another chip/pastry shelf? Link to comment Share on other sites More sharing options...
lacanteen Posted July 13, 2018 Share Posted July 13, 2018 Just pull the dividers on the candy tray, pair up the spirals and couple them in the programming. http://www.dsvendinginc.com/images/pdf-manuals/Snackcenter147.pdf Link to comment Share on other sites More sharing options...
maestro489 Posted July 21, 2018 Author Share Posted July 21, 2018 So I'm trying to couple these motors on the 147 and I'm getting lost at the unplugging part. The manual says I should unplug the motor between the two being coupled. So I basically unplugged every other motor on the row I want to couple. I went through configuration portion, but when I went to test I'm getting make another selection. What am I doing wrong. Link to comment Share on other sites More sharing options...
Central Kentucky Vending Posted July 21, 2018 Share Posted July 21, 2018 you have to plug the motors back in Link to comment Share on other sites More sharing options...
maestro489 Posted July 21, 2018 Author Share Posted July 21, 2018 was I supposed to unplug anything on the back of the tray? Link to comment Share on other sites More sharing options...
AZVendor Posted July 21, 2018 Share Posted July 21, 2018 If each motor currently turns in an opposite direction from the motor next to it then all you have to do is pull every other divider then go into your motor pairing programming and pair all the even numbered motors on that shelf. This will automatically pair them to the odd numbered motors next to the even numbers. Remove every other selection label and you're good to go. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.