Jump to content

Dixie Narco Pepsi


ron

Recommended Posts

The P series is DN's WORST moment, in a tie with the FlexPack machine, and all of them need to be sent to a scrap yard.  Even if you get this issue fixed another one will crop up.  They are notorious for convoluted programming, poorly designed vend sensors that are exposed to moisture running onto the sensor, poorly designed cooling units (imported) that have fans that fail and low pressure switches that fail, sensors on the columns that fail, etc.  

Here are two manuals for it: the first is the original P-series manual and the second is the 720P manual which is for a Pepsi door machine.  http://www.hmivending.com/manuals/Generic 552 P Series Manual.pdf ;  http://www.vend-resource.com/sites/default/files/dixie-narco-hvv-720-504-p-series-pepsi-manual.pdf

I think you may need to set up your "Package" types.  Now here is what no P-series manual will tell you: Package Type 1 is for 12 oz cans 4-deep, 2 is for 20 oz Pepsi bottles, 3 is for 20 oz Coke bottles, 4 is for 20 oz Gatorade and 5 is for 16 oz cans.  These are not guaranteed though 1 and 5 should work fine.  The others for bottles might have changed in recent years as different shaped bottles came out.

You also have to force the machine to Prime each column on first fill and the machine will prime itself on future refills after sell outs.

Link to comment
Share on other sites

If these are Pepsi assets, kindly ask them to pick them up. If you bought them, you are in for an uphill battle. If you acquired them for nothing, remove the bill acceptors and changers and scrap the rest. 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...