Sensit 1 Eprom for a credit card reader to work

[QBVending]

where can i order a eprom for a sensit 1 Ams 39 for a credit card reader to be able to start working?

[AZVendor]

In the long run you will be better off with putting a Sensit 3 upgrade kit in your machine, if AMS still has it.  That will get you a current and updated board, new display and harnesses and most importantly, new drop sensors that will be exponentially better and more reliable than the Sensit 1 sensors.  The kit will set you back about $600 but your machine will be upgraded to eliminate the most aggravating issues with the Sensit 1 design that is 20+ years old now.

EDIT: I spoke too soon.  The Sensit 3 upgrade from D&S Vending is now $1295.  OUCH!  Call them instead and ask for an eprom instead.  

Edited October 23, 2019 by AZVendor

[SCOTT1963]

AMS upped the list price from $450 in Jan. to $1200 in June

I would guess other parts are going to be harder to get going forward.

 

[lacanteen]

I'd scrap the machine before I spent that much on an old AMS

[QBVending]

13 hours ago, AZVendor said:

In the long run you will be better off with putting a Sensit 3 upgrade kit in your machine, if AMS still has it.  That will get you a current and updated board, new display and harnesses and most importantly, new drop sensors that will be exponentially better and more reliable than the Sensit 1 sensors.  The kit will set you back about $600 but your machine will be upgraded to eliminate the most aggravating issues with the Sensit 1 design that is 20+ years old now.

EDIT: I spoke too soon.  The Sensit 3 upgrade from D&S Vending is now $1295.  OUCH!  Call them instead and ask for an eprom instead.  

do they still make eproms for those machines?

 

[SCOTT1963]

Yes, you can still get eproms but that isn't the way to go, it's not reliable with the newest CC readers

better to put that machine where you don't need a CC reader and scrap it when it dies, or sell it to someone else

Get a more modern machine for this location