kyle0050 Posted February 14, 2022 Share Posted February 14, 2022 (edited) I have a Vendo Vmax 576 and I had to do a mother board swap to a new board. Ever since I put this new board in my machine will not take $5s is there a setting I am missing? I looked at the sheet on the door and didn't see anything about $5 acceptance or high value acceptance for me to enable. I have a MEI validator in the machine at the moment. The $5 bill acceptance switch is enabled on the validator Edited February 14, 2022 by kyle0050 Link to comment Share on other sites More sharing options...
AZVendor Posted February 14, 2022 Share Posted February 14, 2022 If it rejects 5s then the validator either has the $5 switch turned off or your validator isn't updated for new 5s Link to comment Share on other sites More sharing options...
Vendo Mike Posted February 14, 2022 Share Posted February 14, 2022 Does it reject the bill and flash "use exact change" or does it just reject the bill. If it was working before replacing the board, you might try a tube fill so the board knows how much change is available. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now