Polyvend PV4424 Bill Validator

[vxl65703]

Can anyone direct me to an upgraded Bill validator and harness for a PolyVend PV4424 snack machine

[Southeast Treats]

What's in there now?  If it's a Maka, what voltage??  Also check the mounting to see if it's old style top and bottom instead of around the mask...

 

[vxl65703]

[Southeast Treats]

I have never found a conversion harness for the 27V model, maybe someone else here can suggest something...

 

[AngryChris]

https://snackattacknow.com/product/maka-to-mars-vn-conversion-cable-24v/

Disclaimer: I don't know if this will definitely work on the polyvend OR if you can even mount it.  It may work, and if it does, it will likely only allow you to use a 2512 or 2502 that takes $1 bills.  

You really need to see what kind of cutout is on the machine.  If there are two brackets for the MAKA, then chances are good that the machine was only designed for a MAKA and a mars won't mount properly.  If it's a simple rectangular cutout with 4 studs, then the mars should fit.

[Southeast Treats]

19 hours ago, AngryChris said:

You really need to see what kind of cutout is on the machine.  If there are two brackets for the MAKA, then chances are good that the machine was only designed for a MAKA and a mars won't mount properly.  If it's a simple rectangular cutout with 4 studs, then the mars should fit.

Exactly.  There is an adaptor available to fit an MEI validator to the old Maka type mounting, I think the Vending Center carries it as a National 145 adaptor kit.