Joe101us Posted April 12, 2017 Posted April 12, 2017 When loading three deep cans it drops to it a time then one of the time then back to two what's wrong I have the shims in place I do not know if the red disk Are set right
Joe101us Posted April 12, 2017 Author Posted April 12, 2017 it vends 2 cans, then 1 can, then 2 cans, then 1 can,
Snoopy Posted April 12, 2017 Posted April 12, 2017 Sounds like your timing gear is set for 20oz bottles need to set for 3 drops per rotation. 3 grooves open not two. You can pull it part way out with your finger and move it.
Snoopy Posted April 12, 2017 Posted April 12, 2017 Also if it is set for bottles, the shim is wrong, you will need a can shim and rod.
Joe101us Posted April 12, 2017 Author Posted April 12, 2017 9 hours ago, Snoopy said: Also if it is set for bottles, the shim is wrong, you will need a can shim and rod. It's got can shims in it what rod do I need I know the 501 needs a rod but I did not know the 522 e needs a rod
AngryChris Posted April 12, 2017 Posted April 12, 2017 If the 522e has 6 wide columns, then you only need plastic shims. I believe you need to shims on each side.
Snoopy Posted April 12, 2017 Posted April 12, 2017 Yes it does matter, are you filling a narrow or wide spot? If it isa narrow you need shim and rod, if you are filling a wide spot just the plastic shims. Just a thought, on the inside of the inside door is there a map that identifies how to set it up, they are on all machines when they are built. If not go to one of the free sites and look at owners manual, very informative for 1st timers.
Joe101us Posted April 13, 2017 Author Posted April 13, 2017 In none of the manuals do I find a setup for it I find the 501e but not the 522e
AZVendor Posted April 13, 2017 Posted April 13, 2017 Use the can setup for a 501E wide column. An E model is an E model and yours has all wide columns.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.