Snack Man 2000 Posted August 13, 2017 Share Posted August 13, 2017 I have a CB700 that vends 2 of the wrong product, and never clears the credit once a bill is inserted. I believe the board is bad. Does anyone know if a the board in a newer cb500 is the same? Link to comment Share on other sites More sharing options...
AngryChris Posted August 13, 2017 Share Posted August 13, 2017 There are different versions so if that one has the older style keypad and the newer style you refer to has the newer keypad with less buttons then probably not. If the keypads are the same then it will likely work. Link to comment Share on other sites More sharing options...
savend Posted August 13, 2017 Share Posted August 13, 2017 Drop sensor might be a good option to look at first. Seems like it should flash an led on the board when it drops and I think the sensitivity can be adjusted. It's been a while since I worked on one. That was just my first thought when you said dropping two & credit still there. Link to comment Share on other sites More sharing options...
Snack Man 2000 Posted August 13, 2017 Author Share Posted August 13, 2017 Okay it looks like I will need to order a board. Any suggestions on the best deal? Link to comment Share on other sites More sharing options...
AngryChris Posted August 13, 2017 Share Posted August 13, 2017 vendnet is where you will probably need to go to get a replacement board but maybe they or someone else can repair the one you have. Link to comment Share on other sites More sharing options...
AZVendor Posted August 13, 2017 Share Posted August 13, 2017 I can send a board if you need it. Rbepic4gatgmaildotcom Link to comment Share on other sites More sharing options...
Snack Man 2000 Posted August 13, 2017 Author Share Posted August 13, 2017 It's probably something I need a replacement for, because the machine can't be down for long. Link to comment Share on other sites More sharing options...
Snack Man 2000 Posted August 17, 2017 Author Share Posted August 17, 2017 The 3508 boars worked perfectly. Just had to change the space to sales settings because the 3502 is a 12 selection. Does anyone have someone they recommend to repair boards? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.