TABV Posted March 13, 2019 Share Posted March 13, 2019 Wondering if anyone has put a Crane Cora device on an AP113 with Revision Door from VE? I put two on and each ran into an issue where the screen on the vending machine was reading an amount of $2.00 and getting hung up after someone put a $1.00 bill in. This was an intermittent issue.. I am working with Crane and VE on this, just curious if anyone else has run into this? Thanks! Link to comment Share on other sites More sharing options...
jasonkw Posted March 14, 2019 Share Posted March 14, 2019 Wouldn't be surprised. Bleeding edge technology that's untested. That's the problem with using the newest stuff Crane releases. Link to comment Share on other sites More sharing options...
Corvus Corax Posted March 19, 2019 Share Posted March 19, 2019 I have noticed the 'VE boards don't seem to play well with multi tube mechs. Link to comment Share on other sites More sharing options...
TABV Posted March 19, 2019 Author Share Posted March 19, 2019 Interesting- thank you! Link to comment Share on other sites More sharing options...
SCOTT1963 Posted March 19, 2019 Share Posted March 19, 2019 Which Mechs Corvus? THere was an issue 6 or so years ago but that was long cleared up Link to comment Share on other sites More sharing options...
Corvus Corax Posted March 22, 2019 Share Posted March 22, 2019 I have noticed the 'VE boards don't seem to play well with multi tube mechs. Conlux CCM5G, Mars CF-7000, Mars VN4510 The Revision door is about 2 years old, and I converted 2 older Royal Merlin soda machines about a year ago. All have had problems. I ended up using some 9302GXs, and maybe a TRC-6512. Link to comment Share on other sites More sharing options...
SCOTT1963 Posted March 26, 2019 Share Posted March 26, 2019 Corvus we don't make doors for Royal or UCB Kits for them Since the bulk of our Kits and doors leave with the very mechs you say don't play well, I 'm curious what the symptoms are? Love to pass along any issues you may be having Link to comment Share on other sites More sharing options...
AngryChris Posted March 26, 2019 Share Posted March 26, 2019 I have ve boards on several AP 7600's. One board is over 5 years old and the others were ordered within the last 2 years. Most have CF7512s in them and no problems. I have problems with the vn4510 though, but those problems go wherever the mechs go. Link to comment Share on other sites More sharing options...
SCOTT1963 Posted March 27, 2019 Share Posted March 27, 2019 I agree, the 4510 may be one of the worst coin mechs ever designed Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.