stevec Posted June 22, 2019 Share Posted June 22, 2019 I have a d-n276E and I am replacing the shims and I am having problem with one of the soda rows. The Tray rotates in the counter clockwise direction. All of the other soda trays rotate in the clockwise direction. Is this a programing thing or ?????? Link to comment Share on other sites More sharing options...
orsd Posted June 22, 2019 Share Posted June 22, 2019 That’s odd. Try swapping motors with another column. If the problem follows the motor the motor is bad. Keep in mind that the rotor position is timed to the cams so be mindful to watch for that. Link to comment Share on other sites More sharing options...
Southeast Treats Posted June 22, 2019 Share Posted June 22, 2019 Is the motor wiring reversed on that motor? Link to comment Share on other sites More sharing options...
lacanteen Posted June 22, 2019 Share Posted June 22, 2019 That's an A/C motor. Wiring has nothing to do what direction it turns. It's either been tampered with or it's for a different machine. Link to comment Share on other sites More sharing options...
stevec Posted June 23, 2019 Author Share Posted June 23, 2019 I recently purchased this machine, I know it has been sitting unplugged for over 3 years. The wiring looks the same as all the other motors. I will have to look closer to the motors. Thanks for any and all suggestions . Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.