gcobio Posted February 12 Share Posted February 12 I have a Dixie Narco 276 drink machine that vends sporadically. I can put money in the machine and it may or may not vend and there is no rhyme or reason. I put money and attempted to vend each selection and it worked approximately 50 percent of the time. (I did this twice). I'm not sure where the problem lies. Any suggestions or advice is welcome. Thanks... Link to comment Share on other sites More sharing options...
cvending Posted February 12 Share Posted February 12 Did this just start to happen? Has it worked properly before now? Could be a set up issue or credit issue, Does it display the correct amount deposited before attempting to vend? Link to comment Share on other sites More sharing options...
gcobio Posted February 12 Author Share Posted February 12 I just purchased the machine from a reseller and was installed about 3 weeks ago. It does display the correct amount deposited before attempting to vend. The CC reader also responds "Thank You" when it thinks the machine has vended. Link to comment Share on other sites More sharing options...
cvending Posted February 12 Share Posted February 12 So it has worked properly until now? Link to comment Share on other sites More sharing options...
Vendo Mike Posted February 12 Share Posted February 12 Sounds like a setup issue or your Vend Complete switches are getting flakey. Does the unit "home" any motors when you close the door? Do you hear your stack shifting around? Any errors like JC-#? Link to comment Share on other sites More sharing options...
NYCandyMaN Posted February 12 Share Posted February 12 most likely a setup issue, check your switches, and settings Link to comment Share on other sites More sharing options...
AZVendor Posted February 12 Share Posted February 12 What products and sizes are you running and in which columns - I think you only have narrow columns in that machine. Link to comment Share on other sites More sharing options...
gcobio Posted February 14 Author Share Posted February 14 16.9 oz sodas for all 7 columns... Link to comment Share on other sites More sharing options...
AZVendor Posted February 14 Share Posted February 14 Here are the proper setups for Coke 16.9 products. https://rc.cranems.com/Uploads/2001-954-01.pdf https://rc.cranems.com/Uploads/2000-840-05.pdf https://rc.cranems.com/Uploads/2001-955-07.pdf Link to comment Share on other sites More sharing options...
gcobio Posted March 16 Author Share Posted March 16 Thanks for all the responses. It was a setup issue, which I have been able to correct due to the input from everyone. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now