Coal River Vending Posted March 23, 2017 Posted March 23, 2017 Getting 2 flashes. Do my settings look right? It has never worked since I installed it. It's in a royal 282 Sent from my iPhone using Tapatalk
AZVendor Posted March 23, 2017 Posted March 23, 2017 If it's a single price machine then try the long pulse setting first and if it doesn't work use the short pulse setting.
Coal River Vending Posted March 28, 2017 Author Posted March 28, 2017 Tried both. No luckSent from my iPhone using Tapatalk
AngryChris Posted March 28, 2017 Posted March 28, 2017 Make sure that you have plenty of coins in your coin mechanism. Your coin mech could be at fault here.
SCOTT1963 Posted March 28, 2017 Posted March 28, 2017 Usually a coin mech problem if you have vended in plenty of change Swap it and load it and test it
Coal River Vending Posted March 29, 2017 Author Posted March 29, 2017 Coin mech seems to function. How would I test that? Door switch works. Sent from my iPhone using Tapatalk
AngryChris Posted March 30, 2017 Posted March 30, 2017 The very first thing I recommend you do is to post a picture of the inside of the machine so we can see what's actually in it, or you can simply tell us IF it has a control board and what it says inside (ie. 1.12, 2.10, 5.06, etc...). I am assuming it's not a single price because it has a door switch. You did a good job of posting clear pictures on the validator settings and the model number, but it's useful to see what's actually inside there. There's about a 90% chance that the problem is either with the validator itself or the coin mechanism. Please show us or tell us what's inside though (ie. control board, coin mechanism, or take a picture for us but the version of the board may be important).
Coal River Vending Posted May 4, 2017 Author Posted May 4, 2017 coin mechInside of machine Sent from my iPhone using Tapatalk
Recommended Posts
Archived
This topic is now archived and is closed to further replies.