vxl65703 Posted May 9, 2019 Share Posted May 9, 2019 I have an AP7600, with a USA Technologies credit card reader. I just realized that the column mapping templates in the USAlive do not match my AP7600 columns, for example, my B column starts with B1, whereas the usalive B Column template starts with B5 so when I do a test vend for B1 on the machine all I am getting is on my report is 0000, same for C, D,E and F columns. Does anyone have a good template that I can use. instead of using A1,A3 etc, I want to put the product names in each selection for example: A1= Snickers A2=Doritos this is the template from USA Technologies 0000=A1 0001=A2 0002=A3 0003=A4 0004=A5 0005=A6 0006=A7 0007=A8 0008=A9 0009=A10 000A=A11 000B=A12 000C=A13 000D=A14 000E=B5 000F=B6 0010=B7 0011=B8 0012=B9 0013=B10 0014=B11 0015=B12 0016=B13 0017=B14 0018=C5 0019=C6 001A=C7 001B=C8 001C=C9 001D=C10 001E=C11 001F=C12 0020=C13 0021=C14 0022=D5 0023=D6 0024=D7 0025=D8 0026=D9 0027=D10 0028=D11 0029=D12 002A=D13 002B=D14 002C=E5 002D=E6 002E=E7 002F=E8 0030=E9 0031=E10 0032=E11 0033=E12 0034=E13 0035=E14 0036=F5 0037=F6 0038=F7 0039=F8 003A=F9 003B=F10 003C=F11 003D=F12 003E=F13 003F=F14 0040=G5 0041=G6 0042=G7 0043=G8 0044=G9 0045=G10 0046=G11 0047=G12 0048=G13 0049=G14 Link to comment Share on other sites More sharing options...
AngryChris Posted May 9, 2019 Share Posted May 9, 2019 What board is it? Link to comment Share on other sites More sharing options...
vxl65703 Posted May 9, 2019 Author Share Posted May 9, 2019 the original board Link to comment Share on other sites More sharing options...
orsd Posted May 9, 2019 Share Posted May 9, 2019 1 hour ago, vxl65703 said: the original board Can't be. The factory board on these machines did not support CC readers or sales data. It most certainly is an aftermarket/retrofit board. Question is, which brand? The two most common are Vendors Exchange UCB and inOne. If you can't figure it out, just post a pic and we can tell you. Link to comment Share on other sites More sharing options...
vxl65703 Posted May 9, 2019 Author Share Posted May 9, 2019 I installed a MDB convertor from Capital vending, which allowed me to attached a MDB Coin mech, bill validator and usatechnologies credit card reader. here is my board Link to comment Share on other sites More sharing options...
cvending Posted May 9, 2019 Share Posted May 9, 2019 That is the pic of your factory board which is not ready for CC readers or telemetry. Do you have a pic of the kit you added? Link to comment Share on other sites More sharing options...
vxl65703 Posted May 9, 2019 Author Share Posted May 9, 2019 Link to comment Share on other sites More sharing options...
AngryChris Posted May 10, 2019 Share Posted May 10, 2019 If you are getting 0000 no matter what selection you choose, that's because your converter kit does not transmit the data you need for column mapping. You may be able to add MDB components and take cards, but you probably won't be able to know which selections were chosen. I don't think those kits can do that, which is why the majority of us recommend just getting a new board to do all of that. Link to comment Share on other sites More sharing options...
orsd Posted May 10, 2019 Share Posted May 10, 2019 Yep, the converters have trouble reporting which selection, as that info is not transmitted over the MDB cable. In order to get sales info, you must have and aftermarket board capable of the DEX protocol. The USAT modem can then get the info through that. Link to comment Share on other sites More sharing options...
vxl65703 Posted May 10, 2019 Author Share Posted May 10, 2019 Ok... can you recommend a good after market board ? Link to comment Share on other sites More sharing options...
AngryChris Posted May 10, 2019 Share Posted May 10, 2019 Either VE UCB or InOne. Both are about $315 without drop sensor and $415 for the VE w/ drop sensor and I think $470 for InOne with drop sensor. Link to comment Share on other sites More sharing options...
Central Kentucky Vending Posted May 10, 2019 Share Posted May 10, 2019 you have to have dex Link to comment Share on other sites More sharing options...
droopi Posted May 13, 2019 Share Posted May 13, 2019 On 5/11/2019 at 12:29 AM, Central Kentucky Vending said: you have to have dex No, you do not have to do a DEX-reading to map colums. As stated before in this thread, just a board that reports through MDB. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now