maestro489 Posted November 8, 2017 Share Posted November 8, 2017 I've got an AP 7600 snack with a mars 6000 coinmech and a mars 2000 series validator. Every time I show up the validator has about 5 $1 in it and has stopped working. No jam, just not working. If I turn it off and back on again it works fine but apparently only about 5 times. What is the problem? Link to comment Share on other sites More sharing options...
AngryChris Posted November 8, 2017 Share Posted November 8, 2017 I don't know but i would just change out the validator first since it sounds like something is wrong with it. Link to comment Share on other sites More sharing options...
Golfdogs Posted November 8, 2017 Share Posted November 8, 2017 I had a similar situation with a GPL 159. I finally changed the validator and the problem went away. Link to comment Share on other sites More sharing options...
AZVendor Posted November 8, 2017 Share Posted November 8, 2017 It might be the quarter tube sensor in the coin mech. Change it out first for another one and see if the problem goes away. Link to comment Share on other sites More sharing options...
lacanteen Posted November 8, 2017 Share Posted November 8, 2017 I agree with AZ. The TRC series was famous for reset failures after a vend. I have tons of extra changers and boards for that machine (cheap) if interested. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.