Refreshments Made Easy Posted May 8, 2016 Share Posted May 8, 2016 I just came across an FSI / USI 3039 The Bill Validator takes a few bills then has trouble with the next. [$1 insert then vend, $1 insert then vend & repeat - then stops] Make: Nippon Conlux Co., LTD Model: NB2-16A-400 I want to change the whole BV all together. Looks like a single price soda machine harness - not too sure. Can the forum please help me out in this situation I am up against. Happy Mother's Day - Mothers! Link to comment Share on other sites More sharing options...
Southeast Treats Posted May 9, 2016 Share Posted May 9, 2016 That's an old Maka... you can get an upgrade harness to put a newer unit in, but also check the mounting. Some of the older Maka's used a mounting system that does not match today's standard. You can sometimes get an adapter plate. AZ will probably have the right parts for you.... Link to comment Share on other sites More sharing options...
AngryChris Posted May 9, 2016 Share Posted May 9, 2016 For ease of installation, I think it's best to get an adapter harness that converts your existing MAKA harness to an mei harness. It's really easy that way. Link to comment Share on other sites More sharing options...
Refreshments Made Easy Posted May 9, 2016 Author Share Posted May 9, 2016 That's an old Maka... you can get an upgrade harness to put a newer unit in, but also check the mounting. Some of the older Maka's used a mounting system that does not match today's standard. You can sometimes get an adapter plate. AZ will probably have the right parts for you.... For ease of installation, I think it's best to get an adapter harness that converts your existing MAKA harness to an mei harness. It's really easy that way. Thank you both for your expertise, I will contact AZVendor for the harness and search online. Fortunately it has the "Standard Bill Validator Mounting" Also, Can you use the Lutech Conversion Kits on these machines? http://www.dsvendinginc.com/p-8468-lu350-micro-mech-to-mdb-conversion-kit-wdex-this-will-give-you-cash-only-dex-info-no-selection-dex-info.aspx Just curious. Link to comment Share on other sites More sharing options...
AngryChris Posted May 9, 2016 Share Posted May 9, 2016 Thank you both for your expertise, I will contact AZVendor for the harness and search online. Fortunately it has the "Standard Bill Validator Mounting" Also, Can you use the Lutech Conversion Kits on these machines? http://www.dsvendinginc.com/p-8468-lu350-micro-mech-to-mdb-conversion-kit-wdex-this-will-give-you-cash-only-dex-info-no-selection-dex-info.aspx Just curious. If the machine has a snackmart 3 board, you may be able to get an InOne board for $315. It's a much better upgrade for the cost than the lutech item. Find out which board it has. In all honesty though, you're better off just changing the harness and adding a newer validator. Link to comment Share on other sites More sharing options...
Refreshments Made Easy Posted May 9, 2016 Author Share Posted May 9, 2016 Angrychris, Thank you for your honesty and support....buying the harness or finding in my mess of supplies and parts is what I plan on doing. I was just wondering on the conversion kits because I just bought like ten of them at my bargain price finds [used one already to upgrade an AP7600 to mdb] Thanks again. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.